 |
 |
|
||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
 |
 |
  |
||||||||||||||||||||||||||||
|
Common Technical Issues: SUZUKI RM125 BRAND: SUZUKIMODEL: RM125 YEARS: 87-88 CATEGORY: DIRT BIKE TECHNICAL ISSUE DETAILS The earliest Suzuki RM125 dirtbikes to use the 6-Pole stator were the '87 models. The stator on these consists of a plate with a pickup coil and a 6-pole stator on which all six poles are wound as a source coil providing power for the CDI. Ignition failure causes: 1) Bad stator source coil, which is a very common fault. Check the resistance of the stock stator. Replace with ESC458 (ignition only) or ESL458 (ignition & lighting output) 2) CDI unit failed. Not as common. Replace the CDI if the stator, ignition coil and all connections test out fine and the bike still has no spark. PRODUCTS AVAILABLE FOR THIS VEHICLE See products available for the SUZUKI RM125, 87-88 DIRT BIKE. « Technical Resources Library :: Known Issues for Specific Vehicles
|
|||||||||||||||||||||||||||||
|
© 2010 - 2023 - www.Electronicamotos.com.ar - Buenos Aires - Argentina |
||||||||||||||||||||||||||||||
