 |
 |
|
||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
 |
 |
  |
||||||||||||||||||||||||||||
|
Common Technical Issues: SUZUKI RM125 BRAND: SUZUKIMODEL: RM125 YEARS: 06-08 CATEGORY: DIRT BIKE TECHNICAL ISSUE DETAILS The stator on these RM125 models consists of a plate with a pickup coil and a 6-pole stator on which THREE poles are wound as an ignition source coil, and THREE poles are wound with their own output specifically to power the electronic circuits inside the CDI unit. Ignition failure causes: 1) Bad ignition source coil, or bad power coil for the CDI, which is a very common fault. Check the resistance of the stock stator. Replace with ESC477 (ignition only) or ESL477 (ignition & lighting output) 2) CDI unit failed. NOT VERY COMMON AT ALL. Replace the CDI if the stator, ignition coil and all connections test out fine and the bike still has no spark. PRODUCTS AVAILABLE FOR THIS VEHICLE See products available for the SUZUKI RM125, 06-08 DIRT BIKE. « Technical Resources Library :: Known Issues for Specific Vehicles
|
|||||||||||||||||||||||||||||
|
© 2010 - 2023 - www.Electronicamotos.com.ar - Buenos Aires - Argentina |
||||||||||||||||||||||||||||||
